Our Courses

Select either a course type or a industry and then location.

We're here to help!
Call 0800 267 476

Search

Sorry, no results...

Try changing your filter selections and trying again.

Accident Reporting & Investigation

Accident Reporting & Investigation

This course covers how accidents occur, how to identify causes, how to investigate and write an accident report.

Unit 17601

Assessor Training

Assessor Training

We are passionate about Assessor training and developing good Assessor practice within the organisations we work with.

Unit 4098

Cab Controlled Gantry Crane

Cab Controlled Gantry Crane

Demonstrate knowledge of the operation of, and hazards associated with, a cab-controlled gantry crane.

Unit 3790

Chainsaw Safety

Chainsaw Safety

This course is aimed at producing a chainsaw operator who is able to safely demonstrate and apply the knowledge for chainsaw use contained in the Approved Code of Practice.

Unit 6916, 6917

Chemical Handling & Storage

Chemical Handling & Storage

This course covers the key requirements for the safe handling and storage of workplace chemicals.

Unit 31290, 31293

Chemical Safety - Foundation

Chemical Safety - Foundation

This course teaches the types, classifications, potential effects and management controls of hazardous substances in the workplace. It is ideal for workers who hold some responsibility for the use of hazardous substances in the workplace, including line managers.

Unit 31290

Chemical Safety - Workplace

Chemical Safety - Workplace

This introductory course enables employers to meet obligations under the Hazardous Substances Regulations 2017 whereby under section 4.5, all workers at risk of exposure to hazardous substances at work to must trained in basic knowledge of chemicals.

Unit 31292

Confined Spaces

Confined Spaces

Training is necessary for supervisors, stand-by-people, workers entering confined spaces and rescue personnel.

Unit 17599, 25510, 18426

Construct Safe - Tier 1

Construct Safe - Tier 1

Axiom Training is an accredited mobile testing centre for the ConstructSafe system, which is owned by the Construction Safety Council.

Contractor Management

Contractor Management

This course teaches the legislative and organisational health and safety requirements for engaging contractors to perform work on site.

Unit 17595

Crawler Cranes

Crawler Cranes

On course completion trainees will be able to apply theory and skills in lifting and placing loads with an overhead crawler crane and analyse and evaluate processes, through practical experience.

Unit 27676

Dangerous Goods

Dangerous Goods

Dangerous goods include substances and articles that have explosive, flammable, toxic, infectious or corrosive properties.

Unit 16718

Dogman Operation

Dogman Operation

This course is for people working on sites where cranes are operating and there is a requirement to communicate with the operators.

Unit 3789

Dogman Sling Complex Loads

Dogman Sling Complex Loads

This course is designed for people working on sites where cranes in use and there is a requirement to communicate with crane operators at a more advanced level, such as with complex loads.

Unit 3801

Elevated Work Platforms

Elevated Work Platforms

The Mobile Elevating Work Platform (MEWP) Code of Practice requires that employees are either sufficiently experienced to do their work safely or are supervised by an experienced person.

Unit 23960, 23966, 23962

Fire & Emergency Warden Duties

Fire & Emergency Warden Duties

This course teaches the duties of a Fire and Emergency Warden and the evacuation requirements for a workplace or site. It can be completed in conjunction with the Fire Extinguisher training for a full day fire safety training course.

Unit 18408

Fire Extinguisher

Fire Extinguisher

This course teaches the different types of fire classes and fire suppression techniques and how to apply safe and effective fire suppression strategies.

Unit 3271, 4647

First Aid Training

First Aid Training

This course is designed for anyone who wants to learn basic first aid. It is also the minimum qualification requirement for a workplace first aider.

Unit 6401, 6402

Forklift

Forklift

Having a trained and certified forklift operator requires a Forklift Operators Certificate as a minimum and if driving on a road, an F endorsement on their licence.

Unit 10851, 18496

Forklift Mounted Safety Platform

Forklift Mounted Safety Platform

This course combines both practical and theory training to ensure the safety of your team within the operation of a forklift mounted safety platform.

Unit 18409

Forklift with Attachments

Forklift with Attachments

This course combines both practical and theory training to ensure the safety of your team within the operation of a Forklifts with Attachments.

Unit 10852

Gas Detection

Gas Detection

The course is designed for people required to operate an atmospheric testing device in order to determine whether a suitable atmosphere exists to work safely.

Unit 25510

Harness - Elementary

Harness - Elementary

Where there is a fall risk, an employer is responsible to ensure that staff are trained on how to work safely and use the equipment according to manufacturer and WorkSafe best practice guidelines.

Unit 25045, 23229

Health & Safety Representative

Health & Safety Representative

This is an introduction to the role of a Health and Safety Representative under the Health and Safety at Work Act 2015 (HSWA).

Unit 29315

Health and Safety Risk Assessment

Health and Safety Risk Assessment

Understand risk assessment as an everyday worker. Attending this course you will be taught how to apply health and safety risk assessment in the workplace.

Unit 30265

Job Safety Analysis

Job Safety Analysis

This course covers how to prepare a work method statement, undertake a job safety analysis and develop safe operating procedures with reference to the Health and Safety at Work Act 2015.

Unit 19522

Light & Heavy 4WD

Light & Heavy 4WD

This course teaches 4WD operators the knowledge, skills, and attributes for all essential areas of the units of competency covered under the full “best practice” guidelines for 4WD operation in the workplace.

Unit 17976, 17978

Light Utility Vehicle

Light Utility Vehicle

This course teaches the knowledge, skills, and attributes for all essential areas of the units of competency covered under the best practice guidelines for Light Utility Vehicle (LUV) driving in the workplace.

Unit 24553, 24556, 24558

Load and Unload a General Freight Vehicle

Load and Unload a General Freight Vehicle

This practical course helps your team learn the skills and correct loading techniques required to ensure goods vehicles are loaded and secured safely.

Unit 1753

Low Level Scaffold

Low Level Scaffold

This course teaches how to work safely to erect non-notifiable and prefabricated frame scaffolding up to five metres in height and does not require a Certificate of Competence or notification to WorkSafe NZ.

Unit 9184

Machinery WTR

Machinery WTR

If you drive a special-type vehicle on the road that isn't a forklift, you must have a W, T or R endorsement on your driver licence.

Unit 17601, 17602, 16703

Manual Handling and Back Injury Prevention

Manual Handling and Back Injury Prevention

This course teaches basic knowledge and skills for the manual handling of goods, equipment, and materials in the workplace. As well as the skills and techniques to ensure correct posture and back safety is maintained throughout.

Unit 17459, 17592

Mini Crawler Cranes

Mini Crawler Cranes

On course completion trainees will be able to apply theory and skills in lifting and placing regular loads with a mini-crawler crane and analyse and evaluate processes, through practical experience.

Unit 26505

Mobile Cranes

Mobile Cranes

On course completion trainees will be able to apply theory and skills in lifting and placing regular loads with a mobile crane and analyse and evaluate processes, through practical experience.

Unit 3795

Moving Loads with Mobile Plant

Moving Loads with Mobile Plant

Through this course, operators will understand and apply the principles of attaching, lifting, moving and placing loads using mobile plant.

Unit 30442, 17695, 31245

New Zealand Health and Safety Legislation

New Zealand Health and Safety Legislation

Health and safety made easy for beginners. Attending this course you will gain knowledge of the New Zealand health and safety legislation and documentation that relates to the everyday workplace.

Unit 497, 17593, 17602, 30264

Non-Slewing Cranes

Non-Slewing Cranes

On course completion trainees will be able to apply theory and skills in lifting and placing regular loads with a non-slewing crane and analyse and evaluate processes, through practical experience.

Unit 24511

NZC in Civil Infrastructure (Level 3)

NZC in Civil Infrastructure (Level 3)

Join our full-time Civil Infrastructure programme and take the first step towards your infrastructure career pathway.

NZC in Commercial Road Transport (HVO) Level 3

NZC in Commercial Road Transport (HVO) Level 3

This programme is designed for those persons wishing to either enter the Commercial Road Transport industry and/or develop their driving skills beyond the basic licence holder, to become a safe and effective operator of a heavy rigid road transport vehicle and/or heavy vehicle combination.

NZC in Commercial Transport Level 3

NZC in Commercial Transport Level 3

This qualification is for people intending to pursue focused development in the skills, capabilities, knowledge and attributes needed to enter an industry where light, heavy and civil transport assets are used.

Open Space Mower Operation

Open Space Mower Operation

This course teaches how to select and prepare mowing equipment and machinery, carry out worksite preparation and safety checks, operate a mower to mow reserves and roadside vegetation and carry out post-operational procedures.

Unit 19570

Overhead Gantry Crane

Overhead Gantry Crane

Overhead travelling cranes, portal cranes, Goliath, semi-Goliath and straddle carriers are referred to as Gantry cranes. The Code of Practise requires operators to be both experienced and trained.

Unit 3800

Permit to Work Issuer

Permit to Work Issuer

This course provides the appropriate knowledge to be able to issue and audit company specific Permits to Work.

Unit 17590

Permit to Work Issuer and Receiver

Permit to Work Issuer and Receiver

This course teaches what is Permit to Work, the benefits of Permit to Work, key features of the system and how to implement the system and monitor its effectiveness.

Unit 17588, 17590

Permit to Work Receiver

Permit to Work Receiver

This course provides the knowledge and skills to prepare and complete job safety and task analysis. You will become competent in the preparation of a Permit to Work and understand how to carry it out.

Unit 17588

Quad Bike

Quad Bike

This course teaches quad bike operators the knowledge, skills and attributes for all essential areas of the units of competency covered under the best practice guidelines for quad bike riding in the workplace.

Unit 24557, 24559, 24554

Safe Tractor Operation

Safe Tractor Operation

This course teaches the knowledge, skills, and attributes for all essential areas of the unit standards covered in this course, enabling the individual to drive a tractor effectively and safely in varied terrain.

Unit 19044, 31913, 31914

Sling Regular Loads Safely

Sling Regular Loads Safely

This course is designed for anyone working or wanting to work on sites where cranes are operating. It is based on industry best practice, equipment on the worksite and relevant company procedures.

Unit 30072

Straddle Carrier

Straddle Carrier

People with this unit standard are able to describe factors effecting the operation of a straddle carrier.

Unit 17161

Telehandler

Telehandler

This is a combined course option for bucket attachment and forklift endorsement for the fork attachment. Telehandler attachments may include buckets, forks or crane.

Unit 23637

Tower Cranes

Tower Cranes

This course teaches application of theory and skills in lifting regular loads with a tower crane and the analysis and evaluation of processes through practical experience.

Unit 3794

Training Colleagues in the Workplace

Training Colleagues in the Workplace

This course will enable you to determine the skills and knowledge required by colleagues, train colleagues in accordance with organisational requirements, and support colleagues in applying new skills and knowledge on the job.

Unit 27565

Truck Class 2

Truck Class 2

An NZTA approved Class 2 truck licence course at Axiom Training will reduce the learner licence period.

Unit 24089, 17574

Truck Class 4

Truck Class 4

Completing our NZTA approved Class 4 Licence course eliminates the learner licence period of six months.

Unit 24089, 17576

Truck Class 5

Truck Class 5

Completing our NZTA approved course will eliminate the learner licence period.

Unit 24089, 17577

Truck Loader Crane

Truck Loader Crane

This course is the minimum requirement for operating a truck loader crane and consists of both theory and practical training.

Unit 16617

Working at Heights - Advanced

Working at Heights - Advanced

Where there is a fall risk, an employer is responsible to ensure that staff are trained on how to work safely and use the equipment according to manufacturer and WorkSafe best practice guidelines.

Unit 25045, 23229, 15757

Working at Heights - Managing Risk

Working at Heights - Managing Risk

This course teaches risk management and the prevention of safety incidents and is critical in managing workplace safety under the Health and Safety at Work Act.

Unit 23231

Workplace Health and Safety Culture and Practice

Workplace Health and Safety Culture and Practice

Attending this course you will gain knowledge of safe work practices, reporting requirements, Health and Safety documentation, communication process, and workplace Health and Safety culture.

Unit 30266